Applicable Documents; Supporting Jaws; Components - Schunk Pronto Montage- Und Betriebsanleitung

1.2
1.3
1.4
Fig. 1

Applicable documents

• General terms of business *
• Catalog data sheet of the purchased product *
• Safety and Installation Instructions for T-Nuts *
• Calculation of the jaw centrifugal forces, "Technology" chapter
in the lathe chuck catalog *
The documents marked with an asterisk (*) can be downloaded on
our homepage www.schunk.com.

Supporting jaws

Serrated
metric
Supporting jaw TRP-M 185/200-1 Supporting jaw TRP-Z 200-1
Supporting jaw TRP-M 185/200-2 Supporting jaw TRP-Z 200-2
Supporting jaw TRP-M 185/200-3 Supporting jaw TRP-Z 200-3
Supporting jaw TRP-M 250-1
Supporting jaw TRP-M 250-2
Supporting jaw TRP-M 250-3
Supporting jaw TRP-M 250/315-1
Supporting jaw TRP-M 250/315-2
Supporting jaw TRP-M 250/315-3
Directly toothed
straight
Supporting jaw TRP-G 200
Supporting jaw TRP-G 250
Supporting jaw TRP-G 315
Ask for our PRONTO configurator.

Components

About this manual
inch
Supporting jaw TRP-Z 250/315-1
Supporting jaw TRP-Z 250/315-2
Supporting jaw TRP-Z 250/315-3
03.00|Quick-Change Jaw System |en
5