Usage And Storage Conditions; Technical Specifications - Philips AVENT SCF334 Handbuch

English
24
Rated maximum output
power of transmitter W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2:These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.

Usage and storage conditions

Keep the breast pump out of direct sunlight as prolonged exposure may cause discoloration. Store
the breast pump and its accessories in a safe, clean and dry place.
If the appliance has been stored in a hot or cold environment, place it in the usage environment to let
it reach a temperature within the usage conditions ( 41°F / 5°C to 104°F / 40°C ) before you use it.
Usage conditions
Temperature
Relative humidity
Atmospheric pressure
Storage conditions
Temperature
Relative humidity

Technical specifications

The adapter is not a part of the medical electric equipment, but is a separate power supply within the
medical electric system.
Mains input Voltage:
Mains input Current:
Mains input Frequency:
Batteries (only for single electric
breast pump):
Separation distance according to frequency of transmitter m
150 kHz to 80
MHz outside ISM
bandsd=1,17 √P
0,12
0,38
1,2
3,8
12
100-240V
1000mA
50-60Hz
Non rechargeable batteries: 4 x 1.5V AA
Rechargeable batteries: 4 x 1.2V, min. capacity 2000 mAh,
max. capacity 2100 mAh.
80 MHz to 800
MHzd=1,17 √P
0,12
0,38
1,2
3,8
12
41°F (+5°C) to 104°F (+40°C)
15% to 93% (non-condensing)
700 and 1060 Pa air pressure
-13°F (-25°C) to 158°F (70°C)
15% to 93% (non-condensing)
800 MHz to 2,5 GHz
d=2,33 √P
0,23
0,73
2,3
7,3
23