Preparing For Use; Cleaning And Disinfecting - Philips AVENT SCF430 Bedienungsanleitung

- Clean and disinfect all parts before first use and after each use.
- Do not use antibacterial or abrasive cleaning agents to clean the breast
pump parts as this may cause damage.
- Wash your hands thoroughly with soap and water before you touch breast
pump parts and breasts to prevent contamination. Avoid touching the
inside of containers or lids.
Warnings to avoid breast and nipple problems including pain:
- Always release the handle before you remove the pump body from your
breast in order to release the vacuum.
- If the vacuum is uncomfortable or causes pain, stop pumping and remove
the breast pump from your breast.
- Do not continue pumping for more than five minutes at a time if you do
not succeed in expressing any milk. Try to express at another time during
the day.
- If the process becomes very uncomfortable or painful, stop using the pump
and consult your healthcare professional.
- Only use accessories and parts recommended by Philips Avent.
- No modification of the breast pump is allowed.
Warning: If you are infected with Human Immunodeficiency Virus (HIV) or
Hepatitis B or C, using the breast pump will not reduce or remove the risk of
transmitting the virus to your baby through breast milk.
Caution
Caution to prevent damage to and malfunctioning of the breast pump:
- Keep the parts away from heated surfaces to avoid deformation of these
parts.

Preparing for use

Disassemble, clean and disinfect all parts before you use the breast pump for
the first time and after every use.
Caution: Be careful when you remove and clean the white valve. Do not
insert objects into the white valve, as this may cause damage.

Cleaning and disinfecting

Step 1: Disassembling
Disassemble the breast pump and bottle completely. Also remove the white
valve from the pump body and the stem from the silicone diaphragm.
7
English