Function Test - PETZL CROLL Handbuch

3
B16_CROLL_B165000K (170610)
7
Installing the rope
Pull the safety catch down and lock it on the frame of the device.
The cam then stays in the open position.
Put the rope into its place. Pay attention to the Up/Down indicator.
Push the safety catch so that the cam presses against the rope. In
this position the safety catch helps prevent involuntary opening
of the cam.
1 2
Removing the rope
Move the device up the rope while pulling the safety catch down
and out.
9
Ascending the rope
Use the CROLL
and another and another
hand rope
clamp (e.g.
ASCENSION ASCENSION
handled rope handled rope
clamp) with clamp) with
a foot-loop.
a foot-loop.
Always attach Always attach
yourself to
the second
ascender with ascender with
an appropriate an appropriate
lanyard.
8
Each time the device is installed onto the
rope, verify that it jams.
3
STOP!

Function test

STOP!
Angled traverse Angled traverse
situation situation
When on an angled When on an angled
traverse, guide the traverse, guide the
horizontal part of the rope horizontal part of the rope
so that it is as vertical as so that it is as vertical as
possible to reduce the risk possible to reduce the risk
of accidentally opening of accidentally opening
the cam. the cam.