Filter Change; Metal Grease Filter - GUTMANN APILAR Bedienungsanleitung

EN

Metal grease filter

Fire hazard ! Greasy residues impair the performance of the cooker hood and
increase the risk of fire. To prevent a fire hazard, the metal grease filter must be
cleaned regularly. The grease filters must be cleaned every 14 days at the latest. The
necessary cleaning of the grease filters is also indicated on the LED display:
After 15 hours of operation, the red LED on the ceiling unit starts flashing - please
clean the metal grease filter.
This is best cleaned in the dishwasher using a gentle dishwasher detergent. The ma-
nufacturer does not accept any liability for possible discolouration caused by the use of
aggressive cleaning agents. Temperatures above 55 degrees should also be avoided.
Attention: Do not use 3-phase cleaners or multi-phase cleaners. DO NOT clean the
metal filter in a commercial dishwasher. Cleaning with aggressive agents such as pet-
rol, acetone, trichloroethylene etc. will destroy the metal filters !
Please note: Due to a galvanic reaction occurring during the rinsing process, the metal
grease filters must not be washed simultaneously with silver cutlery or silver dishes.
There is no right of complaint in case of disregard.
Pull out the filter housing using the red tab and
Grease-Filter ( Part. Nr.: TZ4807 )
22

FILTER CHANGE

Remove the metal grease filter from the top.