Wilo Stratos PARA Serie Einbau- Und Betriebsanleitung Seite 28

English
2.2 Personnel qualifications
The installation, operating and maintenance personnel must have the appropriate quali-
fications for this work. Area of responsibility, terms of reference and monitoring of the
personnel are to be ensured by the operator. If the personnel are not in possession of the
necessary knowledge, they must be trained and instructed. This can be carried out, if nec-
essary, by the product manufacturer at the operator's request.
2.3 Danger in the event of non-observance of the safety instructions
Non-observance of the safety instructions can result in the risk of injury to persons and
damage to the environment and the product/unit. Non-observance of the safety instruc-
tions results in the loss of any claims to damages.
In particular, non-observance can, for example, result in the following risks:
• danger to persons due to electrical, mechanical and bacteriological factors,
• damage to the environment due to leakage of hazardous materials,
• material damage,
• failure of important product/unit functions, and
• failure of required maintenance and repair procedures.
2.4 Safety consciousness on the job
The safety instructions included in these installation and operating instructions, the exist-
ing national regulations for accident prevention together with any internal working, oper-
ating and safety regulations of the operator are to be complied with.
2.5 Safety instructions for the operator
This device can be used by children from 8 years of age as well as by people with reduced
physical, sensory or mental capacities or lack of experience and knowledge if they are
supervised or instructed in the safe use of the device and they understand the dangers
that can occur.
Children are not allowed to play with the device. Cleaning and user maintenance must not
be carried out by children without supervision.
• If hot or cold components on the product/unit lead to hazards, measures must be taken
by the customer to prevent them from being touched.
• Guards for moving components (such as the coupling) must not be removed whilst the
product is in operation.
• Leakages (e.g. from the shaft seals) of hazardous fluids (which are explosive, toxic or hot)
must be led away so that no hazard is caused to persons or the environment. National
statutory provisions must be observed.
• Highly flammable materials should always be kept a safe distance from the product.
• Danger from electrical current must be eliminated. Local directives or general directives
(e.g. IEC, VDE etc.) and instructions from local energy supply companies must be
adhered to.
2.6 Safety instructions for installation and maintenance work
The operator must ensure that all installation and maintenance work is carried out by
authorised and qualified personnel who have sufficiently familiarised themselves with the
installation and operating instructions by studying them in detail.
Work on the product/unit must only be carried out when it is at a standstill. The procedure
described in the installation and operating instructions for shutting down the product/
unit must be strictly observed.
Immediately upon completing work, all safety and protective devices must be put back in
position and/or recommissioned.
28 WILO SE 12/2017