Technical Data; Specifications - attika PILAR Installationsanleitung

The following technical data includes specifications, dimensional drawings and the information plate.
Danish Technological Institute ref.:
Nominal output (kW):
Min./Max. Output (kW):
Heating area (m ):
2
Wood-burning stove diameter x height (mm)
Combustion chamber W x D x H (mm)
Max. load limit (mm)
Min. Uptake (pascal)
Weight (kg) min. dependent on model:
Efficiency (%)
CO emission attributed to 13% O2
NOx emission attributed to 13% O2 (mg/Nm³)
Particle emission in accordance with NS3058/3059 (g/kg)
Dust measurement in accordance with DIN + 13% O2 (mg/Nm³)
Flue gas flow (g/s)
Flue gas temperature (°C)
Calculated flue gas temperature (°C) at spigot
Recommended amount of wood (kg) when stoking the fire
(Distributed between qty. 2 logs, each max. 24 cm)
Intermittent operation
*Not verified by test.
The wood-burning stove is tested and approved by:
DTI
Danish Technological Institute
Teknologiparken Kongsvang Allé 29
8000 Aarhus C
Denmark
www.dti.dk
Tel.: +45 72 20 20 00
Fax: +45 72 20 10 19

TECHNICAL DATA

SPECIFICATIONS

3 00-ELAB-2401-EN
300-ELAB-2401-NS
4.5
2–9 *
90
Ø462 X 1925
352 X 287 X 286
286
-12
140
81
0.074
73
1.81
9
4.4
254
304
1.3
Stoking should be done within 50 minutes
GB - 3