Technical Data; Specifications - attika NEXO Serie Installationsanleitung

Technical data for Nexo is provided below, including specifications, dimensional drawings and rating plates.

SPECIFICATIONS

DTI Ref.: 300-ELAB-2324 EN
300-ELAB-2324-NS
Nominal heat output (kW):
Min./Max. Output (kW):
Heating area (m2): 110
Stove width/depth/height (mm):
Combustion chamber width/depth/height (mm):
Max load limit (mm): 260
Min. Flue draught (Pascal):
Weight (kg) min., depending on model:
Efficiency (%): 80
CO emissions attributed to (%)
NOx emissions attributed to 13% O2 (mg/Nm³):
Particulate emissions in accordance with NS3058/3059 (g/kg):
Dust measurement in accordance with Din+ 13% O2 (mg/Nm³):
Flue gas mass flow (g/s):
Flue gas temperature (°C):
Estimated flue gas temperature (°C) at flue collar:
Recommended amount of wood when topping up the stove (kg):
(Divided over 2 pieces of wood max. 24 cm in size)
Intermittent operation:
*not verified by test.
Max Load
**
The stove has been tested and approved by:
DTI
Danish Technological Institute
Teknologiparken Kongsvang Allé 29
DK-8000 Aarhus C
Denmark
www.dti.dk
Phone: +45 72 20 20 00
Fax: +45 72 20 10 19

TECHNICAL DATA

NEXO 100 w/o side glass
NEXO 100 with side glass
5.0 – 5.7
110
446-398-1025
344-254-262**
260
-12
approx. 147
0.0906
2.24
4.9
268
322
1.4
NEXO 120/140/160/185 w/o side glass
NEXO 120/140/160/185 with side glass
5
446-398-1235/1425/1600/1860
344-254-262**
approx. 158
80
91
4
The stove should be filled within 49 minutes
5
2-9*
110
260
-12
80
0.0906
91
2.24
4
4.9
268
322
1.4
GB - 3