Wood-Burning Stove With Swivel Foot - attika PILAR Installationsanleitung

WOOD-BURNING STOVE WITH SWIVEL FOOT INSTALLATION
A
WOOD-BURNING STOVE WITH
SWIVEL FOOT INSTALLATION
The wood-burning stove can be supplied
with a swivel foot.
To make installation easier,
the wood-burning stove is delivered turned 45°
to the left.
This ensures easier access to the transport
screws, which must be removed when setting
up.
A
A
A
The plastic block marked "FRONT" represents the
wood-burning stove's actual midpoint and sits in the
front of the swivel foot. The block must therefore be at
90° in relation to the wall when setting up. The block
shall subsequently be removed by carefully pulling it
out.
A
Once the wood-burning stove is in position, the
transport fittings can be removed. The swivel foot can
now move.
Front block.
Air intake cover.
8 - GB