Electronicair - attika PILAR Installationsanleitung

ELECTRONICAIR

ElectronicAIR is an electronic system that is programmed to regulate the combustion air in the wood-burning stove. Two
thermocouples constantly communicate with the receiver and remote control. Based on this communication, the damper opens
or closes automatically to ensure the optimal combustion during the start-up and continuous burning. The LED indicates when the
wood-burning stove automatically changes the damper's position.
When the wood-burning stove is not in use, the damper is fully closed. When the door is opened, the door switch ensures that the
damper is fully open to create extra air when starting the fire and when stoking the fire.
If the batteries in the receiver or remote control become flat, the wood-burning stove will continue to function. But the wood-
burning stove damper will always be fully open.
If you wish to manually regulate the damper and thus the supply of air, then set the remote control to manual.
Follow these instructions to use ElectronicAIR.
START-UP
We recommend that only alkaline batteries or equivalent high-quality batteries are used. The batteries should be replaced before
using the wood-burning stove for the first in the year. Do not use a pointed item to remove old batteries.
Remote control
Use qty. 2 AAA batteries for the remote control.
Remote control
Receiver
Use qty. 4 AA batteries for the receiver.
The receiver is positioned in the opening behind the wood-burning stove.
Pull out the tray with the receiver to gain access to the batteries (see drawing).
Receiver
A
A
GB - 21