Operating The Prism Printer; Setting Up A Standalone Printer; Connect The Cables - Rimage PrismPlus! Benutzerhandbuch

Rimage PrismPlus!

Operating the Prism Printer

This section provides information about setting up a standalone printer, installing the printer driver, loading
discs, and setting up your printing preferences.

Setting Up a Standalone Printer

Use these procedures to step up a standalone Prism printer.

Connect the cables

1. Connect the parallel cable to the parallel cable connection at the back of the printer.
2. Connect the other end of the parallel cable to a parallel port on the back of the PC.
3. Connect the power cord to the printer.
4. Plug the power cord into a suitable electrical outlet.
4
Downloaded from www.Manualslib.com
Parallel Cable
manuals search engine
Power Cord
110635_I