Introduction; Operating System Requirements; Media Requirements; Ribbon Requirements - Rimage PrismPlus! Benutzerhandbuch

Introduction

This manual provides the information needed to set up, install, and operate the Prism printer and to identify
the parts.

Operating System Requirements

The Prism is compatible only with Windows 2000, Windows XP, and Windows Server 2003. It requires one
USB port or one parallel port.

Media Requirements

You must use discs that are coated with a surface designed for thermal printing. The media in Rimage
Media Kits™ is designed for optimum use in the Prism.
For information about Rimage Media Kits™ – convenient packages of discs and ribbons, all guaranteed by
Rimage – contact Rimage at 800-445-8288.

Ribbon Requirements

The Prism printer requires ribbons designed specifically for use with the printer. The table below lists the
type of ribbon to use with your printer.
Ribbon Color
Black
Red
Midnight Blue
Multicolor
Store the ribbons at -5°C (23°F) to 40°C (104°F) and at 30-80% relative humidity, non-condensing. Avoid
direct sunlight.

Label Design Requirements

•
Resolution – Use pictures or logos set to 300x300 DPI (Dots Per Inch) or 300x600 DPI.
•
Label Design Size – The width is 5.12" (1536 pixels) and the height is 4.52" (1356 pixels).
•
Printable Area – The printable area of a disc when using a Prism printer is 116 mm (4.567") and the hub
is 38mm (1.496").
Printable Area
110635_I
Downloaded from www.Manualslib.com
Part Number
201737-006
202082-002
203217-001
202506-001
116 mm
Hub Size
38 mm
manuals search engine
Introduction
Number of Discs Printed
2100
2100
2100
500
1