Rimage PrismPlus! Benutzerhandbuch Seite 12

Rimage PrismPlus!
e.
f.
8
Downloaded from www.Manualslib.com
ii.
If your version of the PSS software is 7.3 or below, make sure the En
features box is unchecked.
Verify the USB port selection:
i.
Select the Ports tab.
Note: The USB port selected is the one that the driver will attempt to use. You will be
testing whether this port is the correct one for the printer.
ii.
On the Prism printer, press the
iii.
Inse rt a disc.
iv.
Press the operator button to close the tray.
v.
Select the General t ab on the Rimage Perfect Image Printer Properties dialog box.
vi.
Select Print Test Page. If the USB port selected is correct, a test image prints on the disc.
vii.
If necessary, repeat steps i–v, this time changing the USB port selected.
Important: If you try multiple USB ports before the test successfully prints, be sure to
delete the extra jobs in the print queue.
After successfully printing a test image, select OK. The Windows 2000/XP/Server 2003 driver
installation is complete.
manuals search engine
operator button to open the tray.
able advanced printing
110635_I