Power On The Printer; Loading Discs - Rimage PrismPlus! Benutzerhandbuch

Power on the printer

1. To power on the printer press the power switch
on the rear of the printer. The printer initializes.
2. To power off the printer press the power switch
again.

Loading Discs

1. To open the printer tray, press the operator button.
2. Place one disc on the rubber pad between the two clamping pins and the centering pin.
3. To close the printer tray, press the
110635_I
Downloaded from www.Manualslib.com
Important! Place the disc with the recording side facing down. The recording side has a stacking
ring close to the hub that you can feel with your fingers. If you insert a disc with the stacking ring
facing up , you will damage the print head.
Notes:
If the disc is resting on the clamping pins, the printer tray will not close.
The print pad and plate vary between the standalone and the automated models. The automate
models have a hole through the center of the plate; the standalone model does not. All models
have a centering pin.
manuals search engine
operator button .
Operating the Prism Printer
Power
Switch
Centering Pin
Clamping Pins
d
9