Snap-On TECHANGLE ATECH1FR240B Bedienungsanleitung Seite 14

3. Use UP /DOWN


Selectable levels: 20 to 80 in increments of 5 (factory default = 40).

4. Press ENTER button to accept selection and exit to Settings menu.

EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN buttons
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
ENTER
button
Key Beep Setup
This function will allow user to enable or disable audio feedback when a button is pressed.
1. From Settings menu, use UP

ENTER button.

2. KEY BEEP screen is displayed.
3. Use UP  /DOWN


4. Press ENTER button to accept selection and exit to Settings menu.

EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN buttons
SHOW INFO
SLEEP TIME
LCD CONTRAST
KEY BEEP
ENTER
button
Auto Backlight Setup
This function will allow user to enable or disable backlight from turning on during torque or angle
measurement.
1. From Settings menu, use UP

press ENTER button.

2. AUTO BACKLIGHT screen is displayed.
3. Use UP  /DOWN


4. Press ENTER button to accept selection and exit to Settings menu.

buttons while viewing display to change contrast to desired level.


ENTER
button CONTRAST:
UP/DOWN buttons
CONTRAST:
/DOWN


 buttons to highlight ENABLE (factory default) or DISABLE selection.
KEY BEEP
ENTER
button
ENABLE
DISABLE
UP/DOWN buttons
KEY BEEP
ENABLE
DISABLE
/DOWN


 buttons to highlight ENABLE (factory default) or DISABLE selection.
20
80
buttons to highlight

buttons to highlight

13
KEY BEEP selection then press
AUTO BACKLIGHT selection then