AsViva C28 Benutzerhandbuch Seite 73

COMPUTER
Press START to start the work out, the console will enter the motion picture, SPEED,
RPM, TIME, DISTANCE, CALORIES, WATT displays work out value (image 40).
If the time is set, after START, it will start the count down. Counting down to 0, the console will stop and
WORKOUT data will display(image 41), press EXIT to return to homepage.
TARGET WATT CONSTANT DATA: The value will be displayed according to WATT setting. REAL
WATT CONSTANT DATA: Displays actual work out WATT value.
LOAD CONTROL DATA LOAD shows target WATT value that pair with the LOAD value.
During the work out, press to stop the work out screen display, every value will be saved, the motor
returns to LOAD 1. (image 42)
WATT will be displayed according to the current speed.
Too slow: Please accelerate your speed. Actual watt value < Set watt value (1-25%)
Moderate: Please keep current speed. Set watt value (1+25%)> Actual watt value > Set watt value (1-
25%)
Too fast: Please slow down your speed. Actual value >Set value (1+25%)
LOAD will be adjusted according to the RPM&WATT form and respective LOAD value(the principle is
not exceeding the LOAD of the target) to show the closest LOAD value.
TARGET H.RATE FUNCTION
Under STAND BY mode, press TARGET H.RATE to enter that function(image 44).
You can select TAG, 90%,75%,55% to set heartbeat target value (image 45).
image 40
:
image 44
image 42 image 41
image 45
73