ASSEMBLY
Step 8
Use tool :
•
Remove the preinstalled screws(G1) from the console(G).
•
Connect the sensor wires(L2, L3, L4, L5) with console wires and put the console on the fixing plate.
•
Assembly the console with screws(G1).
Note:
Do not pinch the sensor wire when assembling.
NOTE:
if the machine dose not sit level, you can use the two adjustable end caps(C2&C3) to compensate for
uneven floors.
58
C2
C3
B
G
L2
L3
L5
L4
G1