Signal Tones; Overheating Protection Facility; Rating Plate; Operation And Handing - Caso SlimLine 3400 Originalbetriebsanleitung

14.1.3

Signal Tones

14.1.4

Overheating Protection Facility

14.1.5

Rating plate

15 Operation and Handing

15.1 Functioning and Advantages of Induction cooktops

caso SlimLine 3400
The appliance emits an acoustic signal after being switched on
and in the event of a fault.
Please note
► The acoustic signal continues to sound until the fault has
been rectified or the appliance has been switched off.
You will find more detailed information on error messages in the
chapter entitled „Fault indications".
The appliance is equipped with an overheating protection
facility. If the temperature of the appliance exceeds the critical
limit the appropriate error message is displayed and an acoustic
signal sounds. For safety reasons the appliance shuts off
further power supply. After the cooling-down phase the
appliance can be switched off and then back on again.
Please note
► The acoustic signal continues until the fault has been
rectified or the appliance has been switched off.
You will find more detailed information on error messages in the
chapter entitled „Fault indications".
The rating plate with the connection and performance data can
be founded on the back of the device.
This chapter provides you with important notices with regard to
operating the device. Observe the following notices to avoid
dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation,
so that you can intervene quickly in the event of dangers.
With an induction cooktop the heat is not transferred by a
heating element via the cooking utensil to the food to be
cooked, but rather the necessary heat is generated directly in
the cooking pot with the aid of induction currents.
51