Operating The Appliance; Switching Off; Switching On - Caso SlimLine 3400 Originalbetriebsanleitung

15.4 Operating the Appliance

15.4.1

Switching Off

15.4.2

Switching On

caso SlimLine 3400
► Switch the appliance off after use. This avoids unnecessary
use of energy, and ensures your safety.
► If the appliance is unused for extended periods of time, we
recommend that the appliance be unplugged from the
mains.
The complete appliance is switched off using the Power switch
(1).
When you switch off the device via "On/Standby" and the
temperature of the cooker plate surface is lower than 50°C, the
display shows "-L-". When the temperature of the cooker plate
surface is over 50 °C, it is displaying "-H-".
► Note that the appliance's fan continues to operate for a while
after the appliance has been switched off in order to dissipate
the heat that has built up in the appliance.
► If the appliance is unused for an extended period of time
unplug, the appliance from the socket in order disconnect it
from the mains power supply.
Follow the instructions below in order to operate the appliance
safely.
Plug the power plug into a suitable outlet.
Within 3 seconds after connecting the appliance to the power
supply an acoustic signal sounds. The Display lights then turn
off after 1 s. Press the left power key, an acoustic signal sounds
and the left shows a flashing "_", the left induction cooktop is in
standby mode.
Press the right power key, an acoustic signal sounds and the
left shows a flashing "_", the right induction cooktop is in
standby mode.

Place a suitable cooking pot with its contents to be
cooked on the centre on the hob (Ø 120 mm - 240 mm).
As soon as the induction cooktop is switched on the appliance
determines within 60 seconds whether suitable pots and pans
are being used. If a suitable cooking vessel has not been
recognised within 60 seconds the appliance returns to Standby
mode.
54