Proper Operation; Assembling The Components - EINHELL Royal BM 51 Montage- Und Bedienungsanleitung

Anleitung BM 51 SPK 7 17.01.2006
GB
vibrations, immediately switch it off and check it.
19. Switch off the engine:
- when you leave the lawn mower.
- before you refuel.
20. When you switch off the engine, move the speed
lever (Fig. L) to the Off position. Close the petrol
stopcock (Fig. K).
Maintenance and storage
1. Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
2. Never store the mower (with petrol in the tank)
inside a building in which petrol fumes could
come into contact with open flames or sparks.
3. Allow the motor to cool before you put the lawn
mower in an enclosed area.
4. In order to avoid fire hazards, keep the engine,
exhaust and the area around the fuel tank free
from grass, leaves and leaking grease (oil).
5. Routinely check the grass basket for signs of
wear and impaired functionality.
6. For your own safety, replace worn or damaged
parts without delay.
7. If the fuel tank should require emptying this
should only be done in the open air using a
petrol suction pump (available from DIY shops).
2. Layout (Fig. A) and supplied items
(Fig. B)
A1 Engine start/stop lever – engine brake
B2 Top push bar
A3 Control lever for engine settings / choke
(also Fig. L)
A4 Start tension cable
B5 Lower push bar
A6 Hand locking screw with start tension cable
guide (also Fig. C)
A7 Attached grass basket
A8 Ejector flap
B9 Cutting height adjustment
A10 Motor
B11 Frame for grass basket
B12 Grass basket
B13 Cable binder
B14 Spark plug wrench
B15 Screwdriver (cross-recessed)
B16 Operating Instructions
B17 Lawn mower with engine

3. Proper operation

The petrol lawn mower is intended for private use i.e.
for use in home and gardening environments.
16
13:05 Uhr Seite 16
Private use of the lawn mower refers an annual
operating time generally not exceeding that of 50
hours, during which time the machine is primarily
used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.
The operating instructions as supplied by the
manufacturer must be kept and referred to in order to
ensure that the lawn mower is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servicing
conditions.
Important! Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind.

4. Assembling the components

Some parts of the lawn mower come disassembled.
For quick and easy assembly, read and follow the
instructions below.
Important! For assembly and maintenance work you
will require the following additional tools not included
in the scope of delivery:
An open-ended wrench, size 10.
A ring wrench, size 10.
An open-ended wrench, size 13.
A flat oil pan (for changing the oil).
A 1 liter measuring jug (resistant to oil / petrol).
A petrol canister (5 liters are sufficient for approx.
6 operating hours).
A funnel (which fits the petrol refueling socket on
the tank).
Household cloths (for wiping residual oil / petrol;
dispose of at a petrol station).
Cutter.
Pack of adhesive tape.
A petrol suction pump (plastic version, available
from DIY shops).
An oil can with hand pump (available from DIY
shops).
1 liter of engine oil, 15W-40.