Proper Operation; Before Starting The Equipment; Technical Data; Assembling The Components - EINHELL RG-PM 48 S B&S Originalbetriebsanleitung

Anleitung_RG_PM_48_S_51_S_SPK7:_

3. Proper operation

The petrol lawn mower is intended for private use i.e.
for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of 50
hours, during which time the machine is primarily
used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The operating instructions as supplied by the
manufacturer must be kept and referred to in order to
ensure that the lawn mower is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servicing
conditions.
Important! Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind.

4. Technical data

Note:
The enclosed manual from Briggs & Stratton provides
detailed technical data on the engine!
RG-PM 48 S B&S
Engine type:
Single cylinder four-stroke engine, 158 ccm
Working speed:
Fuel:
Cutting height adjustment:
Cutting width:
L sound pressure level:
pA
16.03.2010 9:16 Uhr
L sound power level:
WA
Vibration a
Weight:
RG-PM 51 S B&S
Engine type:
Working speed:
Fuel:
Cutting height adjustment:
Cutting width:
L sound pressure level:
pA
L sound power level:
WA
Vibration a
Weight:

5. Before starting the equipment

5.1 Assembling the components

Some parts of the mower come disassembled. For
quick and easy assembly, read and follow the
instructions below.
Important! You will need the following additional
tools (not supplied) for assembly, and also for
maintenance work:
A flat oil drip tray (for changing the oil)
A 1 liter measuring jug (oil/petrol resistant)
A petrol can
A funnel (suitable for the tankʼs petrol filler neck)
Household wipes (to wipe up oil/petrol residue;
dispose of these at a filling station)
A petrol suction pump (plastic, available from
DIY stores)
An oil can with hand pump (available from DIY
stores)
Assembly
1. Take the mower and attachment parts out of the
packaging and check that all parts are present
(Fig. 2).
2. Affix the lower push bar (Fig. 3a/Item 5) to the
mower housing and set the desired working
2800 min -1
height. 3 different working heights are available.
standard petrol
Each peg on the lower push bar can be inserted
into a hole situated directly opposite to it, on the
central, (30-75 mm)
mower housing, for example A-A (Fig. 3). The
480 mm
lower push bar must be equally adjusted on both
85,6 dB(A) sides. Now affix the cover (Fig. 3a/Item 23) and
Seite 21
hw
Single cylinder four-stroke engine, 190 ccm
standard petrol
central, (30-75 mm)
hw
GB
96 dB(A)
6,1 m/s 2
36 kg
2800 min -1
510 mm
87,8 dB(A)
98 dB(A)
6,36 m/s 2
39 kg
21