Invacare SOLO2 Handbuch Seite 3

2. To save changes made on the LCD Adjust screen:
A. Press and hold the Mode/Return/Highlight Button
until a different screen appears.
Mode & Flow Adjust Screen
The Mode & Flow Adjust screen allows user to change the
current mode of operation and output flow (FIGURE 1.3).
NOTE: To adjust either the mode or flow, the Mode & Flow Adjust
screen must be displayed. If the battery level screen is displayed,
press the Mode/Return/Highlight , Up/Increase , or
Down/Decrease button for approximately two seconds (screen
should change to Mode & Flow Adjust).
NOTE: Any changes to the setting will not take effect until after the
screen flashes three times.
Up/Increase
Button
Down/Decrease
Mode/Return/
Button
Highlight Button
FIGURE 1.3 Mode & Flow Adjust Screen
SOLO ™ Quick Reference Guide 3 Part No 1163224
2