Intended Use - brose Display Remote Benutzerhandbuch

Remote | Intended Use
Also, damage to humans and animals in the
immediate vicinity cannot be completely
ruled out. Do not use the control unit with
Bluetooth® near medical devices, petrol
stations, chemical plants, explosive areas, and
blasting areas.
It is possible that Bluetooth® is not activated.
For further questions please contact an
authorised bicycle dealer.
› Do not let the display and/or control
unit distract you.
If you do not focus solely on traffic, you
risk being involved in an accident. If you
want to make a keypad entry apart from
changing the assist mode and ride data,
stop and enter the appropriate data.

2. Intended Use

The «Remote Display» control unit of the
Brose Drive System is intended exclusively for
use in this system. It serves to display ride-
relevant information and to control the drive
unit.
In addition to the functions shown here, it may
be that software changes for troubleshooting
and enhanced functions are introduced at any
time.
There is a risk of burns if the motor
housing is touched.
Under extreme conditions, e.g. sustained high
load at low speed when riding uphill or with a
load, temperatures >60°C can occur on some
parts of the drive.
WARNING! Make the basic settings on the
control unit before
Unconcentrated riding endangers you and
other road users.
Familiarise yourself with the functions of the
e-bike and its operation before starting your
first journey.
NOTE: Keep the user manual with you on
all trips. This will allow you to look up less
frequently needed functions at any time.
DATA PRIVACY: If the on-board computer is
sent to the service department for servicing,
the data stored on the device may be
transmitted to service employees.
ENG |
21
starting to ride.