Accessories - WIKA CPB 3000 Betriebsanleitung

Pressure Balance
CPB 3000

8. Accessories

CalibratorUnit type CPU 5000
Compact Tool for the use with a pressure balance.
The CalibratorUnit CPU5000 calculates the required mass-loads for any
pressure step. As an option, it includes the required sensors for
automatical correction of ambient conditions. Also available is a package
for calibrating transmitters.
Specifications according to data sheet CT 35.01.
The following models are available:
CalibratorUnit CPU 5000 Basic system
CalibratorUnit CPU 5000 Basic system incl. Metrology-Extension
CalibratorUnit CPU 5000 Basic system incl. Transmitter-Extension
CalibratorUnit CPU 5000 Basic system incl. Metrology- and Transmitter-Extension
1) includes sensors for piston temperature (measurement directly at the system) and ambient conditions (temperature, air
pressure, humidity)
2) multimeter function for analog transmitters incl. power supply DC 24 V
Further accessories
Trim-masses (1 mg up to 50 g), class F1
Adapter for test item connection for gauges up to NS 250
Set of adapters for quick-connector in a case with threaded inserts G 1/4, G 3/8, 1/2 NPT,
1/4 NPT and M 20 x 1.5 for adaptation to the knurled nut of the test item connection
Set of adapters „NPT" for quick-connector in a case with threaded inserts 1/8 NPT, 1/4
NPT, 3/8 NPT and 1/2 NPT for adaptation to the knurled nut of the test item connection
Angle connection 90°, for test specimens with back mounting connection
Set of O-rings consisting of 10 spare sealings for each pressure connection of the
CPB3000
Operating fluid for CPB3000 up to 1,000 bar, 0.5 litre
Cleaning set for ConTect-systems, hydraulic version
WIKA Operating Instructions Pressure Balance Version 1.1
Description / Features
Description / Features
1)
2)
GB
.
Order no.
7261369
7322031
7432945
12351199
Order no.
7093874
11279614
2036941
12563626
1564838
12822311
2099954
12481425
27