WIKA CPB 3000 Betriebsanleitung Seite 19

Pressure Balance
CPB 3000
In order to remove the star handle from the spindle pump, the spring-loaded thrust pad must be
pressed downward with the aid of a small screwdriver, or a ball-point pen. The star handle may
now be pulled off toward the front.
Spring-loaded
thrust pad
In case of transporting the instrument the operating liquid should be drawn out of the reservoir e.g.
with a suitable syringe (for this also see section 5.3 Removing hydraulic oil).
WIKA Operating Instructions Pressure Balance Version 1.1
GB
19