Kenwood FP940 serie Handbuch Seite 7

mini processor bowl
Use the mini processor bowl to
chop herbs and process small
quantities of ingredients e.g.
meat, onion, nuts, mayonnaise,
vegetables, purées, sauces and
baby food.
mini processor knife blade
mini processor bowl
to use the mini
processor bowl
1 Fit the drive shaft and bowl onto
the power unit.
2 Fit the mini processor bowl -
ensuring the ribs on the inside of
the mini bowl chimney align with
the slots in the main bowl
chimney .
3 Place the knife blade over the
drive shaft .
4 Add the ingredients to be
processed.
5 Fit the lid and switch on.
safety
G
Never remove the lid until the knife blade has completely
stopped.
G
The knife blade is very sharp - always handle with care.
important
G
Don't process spices – they may damage the plastic.
G
Don't process hard food such as coffee beans, ice cubes or
chocolate – they may damage the blade.
hints
G
Herbs are best chopped when clean and dry.
G
Always add a little liquid when blending cooked ingredients to
make baby food.
G
Cut foods such as meat, bread, vegetables into cubes
approximately 1-2 cm ( 1 ⁄
2
G
When making mayonnaise add the oil down the feed tube.
– 3 ⁄ in) before processing.
4
KENSTORE™ attachments carousel
Your food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1 Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel
3 Fit the carousel over the knife blade and place the processor lid
on top
care & cleaning
G
Always switch off and unplug before cleaning.
G
Handle the blades and cutting discs with care - they are
extremely sharp.
G
Some foods may discolour the plastic. This is perfectly normal
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
G
Wipe with a damp cloth, then dry.
Ensure that the interlock area is
clear of food debris.
G
Store excess cord in the storage
area at the back of the
machine .
twin beater geared whisk
G
Detach the beaters from the drive
head by gently pulling them free.
Wash in warm soapy water.
G
Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water.
all other parts
G
Wash by hand, then dry.
G
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
5
.