Safety Systems; Overview - Bosch MUM54Q-Serie Gebrauchsanleitung

en
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0,5 litres of hot or frothing liquid.
Important!
Use the appliance with original accessories only. When using the acces-
sories, follow the enclosed operating instructions.
Use only one tool or accessory at any one time.
, Explanation of the symbols on the appliance or accessory
Follow the instructions in the operating instructions.
Caution! Rotating blades.
Caution! Rotating tools.
Do not place fingers in the feed tube.

Safety systems

Start lock-out
See "Operating positions" table.
The appliance can be switched on in pos. 1
and 3 only:
– when the bowl (11) has been inserted and
turned until it locks into place and
– the blender drive cover has been attached
(8).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does not
start running again when the power is restored.
To switch the appliance on again, turn the rotary
switch to 0/off, then switch on.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload protection
feature has been activated. A possible cause
may be that too much food was processed
at one time.
If a safety system is activated, see
"Troubleshooting".
The operating instructions describe several
models, see also overview of models (Fig.
The appliance requires no maintenance.
114

Overview

Please fold out the illustrated
pages.
Base unit
1 Release button
2 Swivel arm
"Easy Armlift" function to support
the upward movement of the arm
(see "Work positions").
3 Rotary switch
When the appliance has been switched
off (position 0/off), the appliance runs
automatically to the optimum position
for changing the tools.
0/off = Stop
M = Instantaneous switching at maximum
speed, hold switch for required blending
duration.
Settings 1–7, Operating speed:
1 = low speed – slow,
7 = high speed – fast.
4 Operating indicator
Is lit while the appliance is operating (rotary
switch on M or 1–7).

).
Flashes if the appliance has been operated
incorrectly, the electronic fuse has tripped
or the appliance is defective – see section
"Troubleshooting".
Robert Bosch Hausgeräte GmbH
Fig. 