SEH UT 16 Schnellinstallationsanleitung Seite 9

Installing the Print Server
The 'Printer Wizard' is available for installing the print server in Windows
networks. The 'Printer Wizard' can be used in all Windows networks. With the
assistance of the wizard, the print server is set up for printing via TCP/IP ports
(socket printing). In the process, the PRINTSERVER Print Monitor and, under
Windows XP and Windows 2000, the required printer driver are automatically
installed.
The Printer Wizard is available in two versions:
- printerwizardxp.exe for Windows XP/2000/NT4.0
- printerwizard9x.exe for Windows 98/95/Me
The wizard can either be started directly from the CD-ROM or can be copied to a
computer from where it can be started.
Proceed as follows:
1. Install the TCP/IP protocol on your computer.
2. Install the printer driver for Windows 98/95/Me/NT4.0.
3. Start the Printer Wizard.
- Start the file 'printerwizardxp.exe' for Windows XP/2000/NT4.0.
- Start the file 'printerwizard9x.exe' for Windows 98/95/Me.
4. Follow the instructions of the wizard.
After the completion of the wizard, the print server and the printer are
installed.
Instructions on how to install the print server in other networks can be found in
the Installation Manual on the product CD.
Quick Installation Guide (en) 9