Speaker Operation - Silvercrest SMA 500 A1 Bedienungsanleitung

NOTE
GB
► The operating LED
charging procedure and in blue after the battery has
been fully charged.
► The maximum charging time is about 4 hours, and
allows music to be played for up to 8 hours at a
volume level of 50%.
► As soon as the operating LED
the battery is empty and requires charging.

Speaker operation

♦ Completely unwind the speaker cable
cable storage (underside of device).
♦ Connect the 3.5 mm jackplug of the speaker cable
to your playback device.
♦ Switch the speaker on by moving the On/Off
switch
LED
♦ Switch on your player and select the required volume
using the volume control
♦ To obtain a rich bass tone, move the BASS switch
to the ON position.
♦ To switch the speaker off again, move the On/Off
switch
goes out.
10
3
to the ON position. The operating
4
3 illuminates in blue.
to the OFF position. The operating LED
4
illuminates in red during the
3 illuminates in red,
.
5
from the
8
8
6
3
SMA 500 A1