Using The Bluetooth Speaker; Establishing A Bluetooth ® Connection; Setting The Volume; Functions Of The Buttons On The Bluetooth Speaker - Silvercrest SBL TW9 A1 Bedienungs- Und Sicherheitshinweise

Insert the micro-USB plug of the charging
cable into the micro-USB socket
12
Bluetooth speaker. Insert the USB plug of
®
the charging cable into the USB port on a
USB adapter (not included in scope of
delivery).
Note: The LED
10
charging and change green once charging
is completed. The charging time for a
drained battery is approx. 3.5 hours.
Note: The speaker may be used whilst
charging. However, doing so will at a minimum
double the charging time.
Once charging is complete, remove the micro-
USB plug of the charging cable

Using the Bluetooth speaker

Press and hold the Play / Pause
until the signal LED
signal of sound sequence. The speaker will
now attempt to connect to the playback device
(e.g. smartphone or computer).
Establishing a Bluetooth
Remove all plugs from the AUX stereo jack
before you establish Bluetooth
Switch on the playback device and approve
the connection. Please note the requirements
of the software on the playback device. The
LED will light up white and a signal tone
4
sequence sounds.
The speaker identification on the playback
device will be SBL TW9 A1.
Press and hold the
for 2 seconds until the LED signal
white and a signal tone sequence sounds.
The speaker will now attempt to connect to
the playback device (e.g. smartphone or com-
puter).
The maximum range of the connection is ap-
prox. 10 m, but may be reduced to the ge-
ometry of the space (obstructing furniture,
walls, etc.).
The playback device must support Bluetooth
standard 4.2. Otherwise you may not be
able to use all the functions listed below.
of the
9
will light up red whilst
.
12
button
flashes white and a
4
connection:
®
11
radio link.
®
Bluetooth
button 5
flashes
4

Setting the volume

Touch the touch area of the volume control
and move your finger clockwise to increase
the volume.
Touch the touch area of the volume control
and move your finger anti-clockwise to reduce
the volume.
On beep signal will sound when the maxi-
mum or minimum volume has been reached.
Functions of the buttons on
the Bluetooth speaker
Start a playlist on your playback device. With the
change of the volume at the Bluetooth speaker
the volume at the playback device is changed.
The volume on the Bluetooth
justed as described before. Music is played back
through the speakers
Note: The volume synchronize function depends
1
on the Android version and on the brand of mobile
phone. The Bluetooth
These control the following functions:
Button Function
- Hold approx. 2 seconds: switch
device on or off
- Press briefly during playback:
pause or continue playing
- Briefly press it twice: skip to next
song, briefly press it three times:
skip to previous song
- Press and hold the button
prox. 2 seconds to enable / disable
the Bluetooth connection.
- Briefly press TWS button
two units before they connect to a
external Bluetooth device, a signal
tone will be heard if pairing has
been carried out successfully.
- Briefly press the TWS button
again to break the current TWS
connection, a signal tone will be
heard.
®
speaker can be ad-
®
.
8
speaker has 3 buttons.
®
ap-
5
to pair
7
7
GB/MT
3
3
it
27