Kaisai KFS-50 HRFI Bedienungsanleitung Seite 76

Features
Default Setting
When the air conditioner restarts after a power
failure, it will default to the factory settings
(AUTO mode, AUTO fan, 24°C (76°F)). This
may cause inconsistencies on the remote
control and unit panel. Use your remote
control to update the status.
Louver Angle Memory Function (some models)
Some models are designed with a louver angle
memory function. When the unit restarts after a
power failure, the angle of the horizontal louvers
will automatically return to the previous position.
The angle of the horizontal louver should not be
set too small as condensation may form and drip
into the machine. To reset the louver, press the
manual button, which will reset the horizontal
louver settings.
Energy Saving Tips
DO NOT set the unit to excessive temperature levels.
•
While cooling, close the curtains to avoid direct sunlight.
•
Doors and windows should be kept closed to keep cool or warm air in the room.
•
DO NOT place objects near the air inlet and outlet of the unit.
•
Set a timer and use the built-in SLEEP/ECONOMY mode if applicable.
•
If you don't plan to use the unit for a long time, remove the batteries from the remote control.
•
Clean the air lter every two weeks.
•
Adjust louvers properly and avoid direct air ow.
•
Closing curtains during heating also
helps keep the heat in
Auto-Restart (some models)
In case of power failure, the system will
immediately stop. To restart the unit, press the
ON/OFF button on the remote control. If the
system has an auto restart function, the unit will
restart using the same settings.
Refrigerant Leak Detection System
(some models)
In the event of a refrigerant leak, the LCD screen
will display "EC" and the LED indicator light will
ash.
For a detailed explanation of each function,
refer to the Remote Control Manual.
Doors and windows should be kept
76
closed