Philips GC4440 Bedienungsanleitung Seite 8

ENGLISH
8
◗
If the tap water in your area is very hard, we advise you to mix it
with an equal portion of distilled water, or to use distilled water
only.
5 Close the cap of the filling opening ('click') (fig. 4).
Setting the temperature
1 Type GC4440 only: remove the heat-resistant protective cover
(fig. 5).
Do not leave the heat-resistant protective cover on the soleplate
during ironing.
2 Put the iron on its heel and set the required ironing temperature
by turning the temperature dial to the appropriate position (fig. 6).
1
- Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)
1
- Silk
2
- Wool
3 Cotton
-
- MAX linen
If you do not know what kind or kinds of fabric an article is made of,
determine the right ironing temperature by ironing a part that will not
be visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric
to prevent shiny patches. Avoid using the spray function to prevent
stains.
Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.
3 Put the mains plug in an earthed wall socket.
◗
The amber temperature light goes on (fig. 7).
4 When the amber temperature light has gone out, wait a while
before you start ironing.
The temperature light will go on from time to time during ironing.