Philips GC4440 Bedienungsanleitung Seite 13

7 Hold the iron over the sink, press and hold the Calc-Clean
button and gently shake the iron to and fro (fig. 16).
Steam and boiling water will come out of the soleplate. Impurities and
flakes (if any) will be flushed out.
8 Release the Calc-Clean button as soon as all the water in the
tank has been used up.
Repeat the Calc-Clean process if the iron still contains a lot of
impurities.
After the Calc-Clean process
- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when it has reached the set ironing temperature.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down before you store it.
Storage
1 Set the steam control to position 0 and unplug the iron.
2 Empty the water tank (fig. 17).
3 Let the iron cool down.Wind the mains cord and fix it with the
cord binder (fig. 18).
4 Always store the emptied iron on its heel on a stable surface.
Heat-resistant protective cover (GC4440 only)
Do not use the heat-resistant protective cover during ironing.
1 Put the iron on the heat-resistant protective cover (fig. 19).
2 Wind the mains cord and fix it with the cord binder.
3 You can store the iron on the heat-resistant protective cover
immediately after ironing. It is not necessary to let the iron cool
down first.
ENGLISH
13