Safety Notices; Installation; Connecting The Fitting; Connecting Accessories (Shower Hose And Shower Head) - Miomare IAN 274849 Montage-, Bedienungs- Und Sicherheitshinweise

Safety notices

LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unattended with the pack-
aging material. Suffocation hazard. Keep this
product well away from children. This product
is not a toy.
BEWARE OF ELECTRIC SHOCK!
Leaking or water discharge can lead
to life-threatening danger due to
electric shock. Carefully check that all connec-
tions are watertight. Also ensure that all wires
of electric appliances are correct and have been
securely installed.
CAUTION! RISK OF INJURY! Please ensure
that no parts are damaged and that all parts
are correctly assembled. Incorrect assembly could
lead to injury. Please note that the seals are wear
parts and must be changed from time to time.
Damaged parts could impact safety and function.
Be sure all seals are correctly seated.
SCALDING RISK! When adjusting the hot
water temperature be sure the water tempera-
ture is not too high.
CAUTION! Ensure that the hot / cold water
plaque has been attached the right way
3
round. The correct position is as follows:
left = red (hot water)
right= blue (cold water).
CAUTION! DAMAGE TO THE ARTICLE!
Please have all installations performed by skilled
individuals.
Please note that the seals are wear parts and
must be changed from time to time.
Any leakage or sudden escape of water can
cause considerable damage to buildings and
property. All connections must therefore be
checked carefully to ensure that they are tight.
Familiarise yourself prior to installation with all
local conditions, e.g. water connections and
shut-off device.
The product is only suitable for use in rooms in
which a temperature above 0 °C is maintained.
274849_Wannenfuell-Brause-Armatur_Modell B_Content_ES.indd 13

Installation

Note: Familiarise yourself with the product prior to
DANGER TO assembly. Carefully read the following assembly in-
structions and safety advice. In the event of incorrect
installation, all warranty claims – particularly in re-
lation to subsequent damage – are excluded.
CAUTION! Before you start installation turn
off the water supply at the mains. Otherwise
injuries and / or property damage may occur.

Connecting the fitting

Note: this step requires an SW 30 mm open-end
spanner and sealing tape.
Note: cover any parts which will be screwed with
a damp cloth or plastic clamps. This will prevent
scratches.
Follow these steps:
Wrap sealing tape around the roughened thread-
ed part (½ thread) of the S-connectors
Note: sealing tape not included.
Screw the S-connectors
threaded parts into the wall connectors.
Horizontally align the screwed in S-connectors
with the spacing guide for the fitting.
By hand, tightly screw the caps
S - connectors
Insert the seals
screw the fitting body
onto the S-connectors
Connecting accessories
(shower hose and shower head)
Note: Shower hose and shower head are not in-
cluded in delivery.
Note: Cover any parts which will be screwed with
a damp cloth or plastic clamps. This will prevent
scratches.
Connect a standard shower hose to the shower
connector
Connect a standard shower head to the shower
hose.
Safety notices / Installation
with the sealed
14
onto the
13
to the wall.
14
into the swivel nuts
12
with the swivel nuts
8
.
14
.
10
.
14
14
and
11
11
GB 13
09.12.15 16:15