Safety Advice - Miomare HG00518 Montage-Und Sicherheitshinweise

Multi-function shower head set
Introduction
Q
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Only use the product as instructed and only
for the indicated field of application. Keep these
instructions in a safe place. If you pass the product
on to anyone else, please ensure that you also
pass on all the documentation with it.
Intended use
Q
Suitable for use with all pressure-resistant hot water
systems such as central heating, continuous-flow
water heater, pressure boiler etc. It is not suitable
for low-pressure water heaters such as wood-fired
or coal-fired hot-water heaters, oil-fired or gas-fired
heaters, open electrical storage heaters. If in doubt,
please consult a plumber or specialist. The product
is intended for personal use only and not for
medical or commercial use. The manufacturer does
not accept any liability for any damage caused by
improper use.
Description of parts
Q
Hand shower
1
Gaskets
2
Shower hose
3
Water-saving insert
4
Upper wall bracket
5
Lower wall bracket
6
ø
Screws (approx.
7
Covering caps
8
Shower rod
9
Hand shower holder
10
ø
Dowels (approx.
11
Soap dish
12
Covering cap
13
3.6 x 34 mm)
6 mm)
Spray plate
14
Hand shower lever
15
Adjustment Knob
16
ø
Screw (approx. 3.8 x 10 mm)
17
Technical data
Q
Hand shower: approx. 28.5 x 15 cm (H x
5 adjustable positions
Shower rod: approx. 70 cm, metal
Shower hose: approx. 150 cm, metal,
G 1
standard connection
Minimum
working pressure: 1.5 bar

Safety advice

Avoid the risk of injury!
CAUTION! DANGER OF INJURY! Please
ensure that no parts are damaged and that all
parts are correctly assembled. Incorrect
assembly or fitting may lead to injury.
Damaged parts can adversely affect safety and
proper function.
CAUTION! RISK OF SCALDING! When
making the hot water setting please ensure that
the temperature of the water is not too high.
CAUTION! RISK OF SCALDING! Using
the water stop function may alter the
temperature of the water. Check the water
temperature before stepping into the shower.
J The shower rod
9
or support anything, as the fixings and the rod
are designed to support only their own weight.
⁄
" (approx. 21 mm)
2
should not be used to attach
GB/IE/NI
ø
),
9
5