SATA AE1016H Gebrauchsanweisungen Seite 72

7.3.2.2
7.3.2.4
To main body
Pressure
regulating valve
72
AE1016H/AE1016H-3
Tee To auxiliary arm
Inlet of main air
source
中文
EN DE
Place the main body of auxiliary arm on the backing plate,
align the four holes of bottom plate with the holes of
backing plate, and load the bolts (Fig. 3-5) into the four
holes (Fig. 6) and fit the bottom plate (Fig. 3-3) to the
corresponding screws through the bottom of main body (Fig.
7), insert the plain washer and tighten it slightly with nuts to
make them contact (Fig. 8).
Fig. 7
Fig. 8
Remove the air pipe of air source triplet at the outlet,
connect the Y-type internal tee and air outlet with a section
of ф8PU tube, and connect the other to the removed air
source pipe (Fig. 9).
Fig. 9
RU KO PT JA ES