SATA AE1016H Gebrauchsanweisungen Seite 54

4.2.6
4.2.7
4.2.8
54
AE1016H/AE1016H-3
中文
EN DE RU KO
First remove the fixing screws on the ejector
cylinder (Fig. 4-2) and set it aside.
Fig. 4-2
Install the column on the upper seat of
cabinet, align the column spindle hole with
the mounting hole of upper seat of cabinet,
insert the spindle (Fig. 4-3) and then screw the
washer and bolt according to the tightening
torque of 70 Nm.
Fig. 4-3
Place the ф12 hole at the lower front of
column at the round hole of upper seat (Fig.
4-4), load the hexagonal bolt and tighten it
with nut (Fig. 4-5).
Fig. 4-4
PT JA ES