Herunterladen Inhalt Inhalt Diese Seite drucken

Anbohrschelle Elgef Plus Monoblock D40 Und D50 Mm - GF ELGEF Plus Installationsanleitungen

Vorschau ausblenden Andere Handbücher für ELGEF Plus:
Inhaltsverzeichnis

Werbung

Installationsanleitung beachten
Die Installationsanleitung ist Teil des Produktes und ein wichtiger Baustein
im Sicherheitskonzept. Nichtbeachtung kann zu schweren Verletzungen oder
Tod führen.
• Installationsanleitung lesen und befolgen.
• Installationsanleitung stets am Produkt verfügbar halten.
• Installationsanleitung an alle nachfolgenden Verwender des Produkts
weiter geben.
Bestimmungsgemässe Verwendung
Das Produkt ist ausschliesslich dazu bestimmt, nach Einbau in ein Rohrlei-
tungssystem Medien innerhalb der zugelassenen Druck- und Temperatur-
grenzen durchzuleiten oder den Durchfluss zu regeln.
Anwendung: PE-Rohrleitungssysteme, welche Trinkwasser bis zu 16 bar
oder Gas bis zu 10 bar befördern. Weitere Anwendungen nach Rücksprache
mit dem Hersteller möglich.
Zu diesem Dokument
Dieses Dokument beinhaltet alle notwendigen Informationen, um das Pro-
dukt zu installieren.
Beschriebene Produktvariante
Diese Installationsanleitung beschreibt Anbohrschellen ELGEF Plus
Monoblock d40mm und d50mm PE100 SDR11.
Mitgeltende Dokumente
• Technisches Handbuch für PE-Rohrleitungssysteme in der Versorgung.
• Bedienungsanleitung Elektroschweissgerät.
• Georg Fischer Planungsgrundlagen Industrie.
Diese Unterlagen erhalten Sie über Ihre Georg-Fischer-Vertretung oder
unter www.gfps.com.
Sicherheit und Verantwortung
Um die Sicherheit im Betrieb zu gewährleisten, ist der Betreiber für folgende
Massnahmen verantwortlich:
• Produkt wird bestimmungsgemäss verwendet.
• Montage wird von Fachpersonal durchgeführt.
• Rohrleitungssystem ist fachgerecht verlegt und wird regelmässig über-
prüft.
• Personal wird regelmässig in Arbeitssicherheit und Umweltschutz an
druckführenden Rohrleitungen unterwiesen.
Das Personal ist für folgende Massnahmen verantwortlich:
• Kennen, Verstehen und Beachten der vorliegenden Installationsanleitung.
Transport und Lagerung
• Das Produkt in der Originalverpackung transportieren und lagern.
• Das Produkt vor Staub, Schmutz, Feuchtigkeit sowie Wärme- und UV-
Strahlung schützen.
Haftungsausschluss
Die technischen Daten sind unverbindlich. Sie gelten nicht als zugesicherte
Eigenschaften oder als Beschaffenheits- oder Haltbarkeitsgarantien. Ände-
rungen vorbehalten. Es gelten unsere Allgemeinen Verkaufsbedingungen.
20
Observe installation manual
The installation manual is part of the product and an important module of the
safety concept. Non-observance could result in serious injury or death
• Read and observe installation manual.
• Installation manual must be available at the product.
• Pass installation manual to following users of the product.
Intended use
The product is intended exclusively for conveying media in the allowable pressu-
re and temperature range or for controlling flow in piping systems into which it
has been installed.
Application: PE piping system which transports drinking water up to 16 bar or
gas up to 10 bar. After consulting the manufacturer, further applications are
possible.
Regarding this document
This document describes all necessary information to install the product.
Described product type
This installation manual describes electrofusion tapping saddles ELGEF Plus
monobloc d40mm and d50mm PE100 SDR11.
Related documents to this installation manual
• Technical Manual for PE Piping Systems in Utilities.
• Operating instruction fusion unit.
• Georg Fischer Planning Fundamentals Industry.
The documents may be obtained from your Georg Fischer sales company or via
www.gfps.com.
Safety and responsibility
To guarantee the safety at work, the operator is responsible for following actions:
• Product must only be used according to the specifications for which it has been
intended.
• Assembly and installation must be carried out by qualified personnel.
• Piping system must be installed by professionals and its functionality is che-
cked regularly.
• Personnel must be instructed on a regular basis in all aspects of work safety
and environmental protection especially those pertaining to pressure–bearing
piping system.
The personnel is responsible for following actions:
• Knowing, understanding and adhering to this installation manual.
Transport and storage
• The product must be transported and stored in its original packaging.
• Protect the product from dirt, dust, humidity, and especially heat and UV radia-
tion.
Disclaimer
The technical data are not binding. They neither constitute expressly warranted
characteristics nor guaranteed properties nor a guaranteed durability. They are
subject to modification. Our General Terms of Sale apply.
Georg Fischer Piping Systems Ltd.
Ebnatstrasse 111, 8201 Schaffhausen/Switzerland
Phone +41 (0)52 631 11 11, Fax +41 (0)52 631 28 00
info.ps@georgfischer.com, www.gfps.com
173.282.638
GFDO_6264_1b_4b (02.14)
© Georg Fischer Piping Systems Ltd.
CH-8201 Schaffhausen/Switzerland, 2014
GF Piping Systems
Installationsanleitung
Installation manual
Anbohrschelle ELGEF Plus
Monoblock d40 und d50 mm
Tapping saddle ELGEF Plus
Monobloc d40 and d50 mm

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis