Proper Use; Description Of Parts; Technical Data; Included Items - ULTIMATE SPEED HG02971 Bedienungs- Und Sicherheitshinweise

Hydraulic Bottle Jack

Proper use

Q
The hydraulic vehicle jack is intended for raising
and lowering motor vehicles. Other uses or mod-
ification of the hydraulic vehicle jack shall be con-
sidered as improper use and may lead to injury
or damage. The manufacturer will not accept lia-
bility for loss or damage arising from improper use.
The product is not intended for commercial use.
Note: Reclose the release valve
use!

Description of parts

Q
Support plate
1
Extension screw
2
Lifting handle socket
3
Safety valve
4
Release valve
5
Lifting handle (for pump mechanism)
6
Rod (for release valve)
7
Oil plug
8

Technical data

Q
Stroke: approx. 18.5–36 cm
Maximum load: 3000 kg
Weight: approx. 3.0 kg
Hydraulic oil: Complies with ISO VG 15

Included items

Q
1 Hydraulic vehicle jack
1 Lifting handle
1 Rod for release valve
1 Operating instructions
6 GB/CY
DANGER! Follow the instructions below to
avoid the threat of loss of life, injury, or dam-
age to the product etc.
Always use axle stands and wheel chocks
in addition to your hydraulic vehicle jack.
Never work under a raised vehicle unless
you have taken additional safety precautions.
This is intended to prevent the vehicle from
rolling away, sliding off or overturning the jack.
after each Use the product on a solid, level surface
5
only. Using the product on an unstable or
uneven surface – such as a gravel surface
– may lead to the load slipping.
The person operating the jack must observe
the jack and the load during all movements.
Never work under the raised load if it has
not been made secure by suitable means.
Do not allow the hydraulic vehicle jack to
be used by uninstructed or inexperienced
persons.
Before using the hydraulic vehicle jack take
precautions to prevent the vehicle from roll-
ing away. Put the handbrake on, place the
vehicle in gear (with automatic gearboxes
set to "P") and chock the wheels.
Even with safety measures in place always
remain alert and make a visual check that
the support plate
against the vehicle jacking point.
Make sure that no petrol, battery acid or
any other dangerous substance can flow out
of the vehicle when the vehicle is being lifted.
Check that no person or object is under the
vehicle before you lower it.
Lower the vehicle slowly.
Check that all parts have been assembled
and fitted properly and are undamaged.
Before each use check that the hydraulic
vehicle jack is working properly. Check the
screws and valves of the hydraulic vehicle

Safety notes

Ensure that you never exceed the
allowable (rated) load capacity.
3000
kg
is firmly seated
1