Operation; Operating Buttons; Menu Structure - EuroLite LED KLS-902 NEXT Bedienungsanleitung

OPERATION

The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The display shortly indicates the firmware version followed by the last operating mode. The light
set may be controlled via IR remote control or a DMX controller. The operating modes can be selected by
means of the display and the control buttons.

Operating buttons

Button
MENU
ENTER
UP
DOWN

Menu structure

Mode
Automatic mode
Sound control
Color mode
DMX mode
Slave mode
Function
Selects the operating mode or returns to the initial screen.
Activates a value to be modified or saves a value when modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Display
A.P01-20
SWIT/FADE
AUT
d.01-100
S.01-100
SP.01-20
SOU
SWIT/FADE
R.000–R.255
G.000–G.255
B.000–B.255
ALL
W.000–W.255
COL
S.000–S.100
ALon
d***
03CH
04CH
06CH
dПH
08CH
16CH
18CH
20CH
SLA SLAV
Show program 1-20
Color switch or fade
Brightness 1-100
Running speed 1-100
Show program 1-20
Color switch or fade
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Strobe effect
(0 = off, 1-99 = speed slow > fast,
100 = sound-controlled strobe effect)
PAR 1
PAR 2
Individual color settings for each spot
PAR 3
PAR 4
Start address (read only)
d001-509
3-channel mode and start address
d001-508 4-channel mode and start address
d001-506 6-channel mode and start address
d001-504
8-channel mode and start address
d001-496 16-channel mode and start address
d001-484
18-channel mode and start address
d001-482 20-channel mode and start address
Slave function
28/40
Function
00126630, Version 1.0