Do not take damaged or incomplete devices into operation under any circumstances.
Special conditions for storage and transportation of device listed in Section "Technical specifications (Page 9)".
1.3
Design of the nameplate
Layout of the nameplate
①
Manufacturer
②
Safety class
③
Consult operating instructions
④
Conformity with country-specific directives
Figure 1-1
Nameplate, example
Layout of Ex nameplate
①
Approvals
②
ATEX/IECEx marking for hazardous area
Figure 1-2
Ex nameplate, example
1.4
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly packaged to provide sufficient
protection during transport. Siemens cannot assume liability for any costs associated with transportation damages.
4
⑤
Serial number
⑥
Place of manufacture
⑦
Order number
⑧
Product name
③
FM/CSA marking for hazardous area
④
Permitted ambient temperature for the hazardous
area of the corresponding temperature class
SIPART PS2 external position detection system
A5E03830794-03, 09/2014