Reference Standards; General Characteristics; Environmental Conditions For Use; Accessories - HT MPP300 Bedienungsanleitung

8.2.

REFERENCE STANDARDS

Instrument safety:
Safety of measuring accessories:
Technical documentation:
Insulation:
Mechanical protection:
Pollution level:
Measurement category:
8.3.

GENERAL CHARACTERISTICS

Memory
Memory capacity:
Integration Period:
Battery duration (with SOLAR-02):
Characteristics of radio module
Frequency range:
R&TTE category:
Max transmission power:
Max RF connection distance:
Power supply
Internal power supply:
External power supply:
Mechanical characteristics
Dimensions (L x W x H):
Weight (batteries included):
8.4.

ENVIRONMENTAL CONDITIONS FOR USE

Reference temperature:
Operating temperature:
Allowable relative humidity:
Storage temperature:
Storage humidity:
Max operating altitude:
(*) Prescriptions for the use of the instrument at altitudes between 2000 and 5000m
As regards inputs, the instrument must be considered as downgraded to overvoltage
category CAT II 1000V DC and CAT III 300V to earth max 1000V between inputs. The
marks and symbols found on the instrument are valid only when the instrument is used at
altitudes <2000m
This instrument satisfies the requirements of Low Voltage Directive 2006/95/EC
8.5.

ACCESSORIES

See the attached packing list
IEC/EN61010-1
IEC/EN61010-031
IEC/EN61187
double insulation
IP 40
2
CAT III 1000V DC, Max 1000V between DC inputs
CAT IV 300V AC to earth, max 600V between AC inputs
2 MBytes
5,10,30,60,120,300,600,900,1800,3600s
approx. 1.5 hours (@ PI = 5s)
approx. 8 days (@ PI = 600s)
2.400  2.4835GHz
Class 1
30W
1m (39in)
Internal rechargeable Li-ION battery (3.7V, 1900mAh)
Battery duration >3 hours
AC/DC power supply 100240VAC/50-60Hz – 5VDC
300 x 265 x 140mm ; (12 x 10 x 6in)
1.2kg (2lv)
23° ± 5°C (73° ± 41°F)
0 ÷ 40°C (32 ÷ 104°F)
<80%HR
-10 ÷ 60°C (14 ÷ 140°F)
<80%HR
2000m (*) (6562ft)
(LVD) and of EMC Directive 2004/108/EC
EN - 23
CAUTION
MPP300