Working With The Appliance - Silvercrest SMPS 7 D2 Bedienungsanleitung

■ Cylindrical miller
For grinding off thick toenail surfaces and rough smoothing of the
surfaces.
You can use the cylindrical miller
nail surfaces.
♦ Always hold the cylinder miller
and apply light pressure and circular movements to remove
the excess growth.
■ Hardened skin remover
For large-scale and rapid removal of thick hardened skin or
calluses on the sole or heel of your foot.
♦ Guide the hardened skin remover
and heel to be treated while exerting gentle pressure.

Working with the appliance

WARNING! RISK OF INJURY!
Excessively long or intensive treatment can also
injure deeper layers of skin.
► Therefore, check the treatment progress and results regularly.
Diabetics in particular are less sensitive on their hands and feet.
NOTE
► The attachments do not have as much effect on softened skin.
Therefore, do not carry out any pretreatment in a water bath
before using the appliance.
1) Find a well-lit place to work. There must be a mains power outlet
in close proximity.
2) Insert the appropriate attachment for your purpose in the attach-
ment fitting
SMPS 7 D2
15
:
16
:
. The attachment must sit securely.
15
to mill away thickly growing
15
parallel to the nail surface
16
over the parts of the sole
GB │ IE │
33 ■