Programming
• After setting the temperature by pressing the
press
to confirm the setting and start operation.
Hint:
After setting this function, the screen shows the
clock
and „End".
Press
to inquire the end time (3 seconds).
Turning on the oven lighting
• Use the
key to navigate to the lamp function
(until the icon lights up in the display).
• Press
to confirm.
Child lock / key lock
Locking the control panel:
• Press and hold the
and
A beep will sound and the
play indicating the key lock is activated.
Unlocking the control panel:
• Press the same key combination again – the key lock will
be released.
Energy saving function
• During in waiting state and reminding state , press
for three seconds, the display will turn itself off and set to
energy-saving mode.
• If there's no operation in 10 minutes in waiting state, the
display will shut down and go into energy-saving mode.
• In energy-saving mode, press any key to quit the energy-
saving mode.
key,
keys for 3 seconds.
icon will appear on the dis-
General operating notes
• The oven light is turned on in all heating modes.
• When you have selected a heating type, but the
is not pressed within 5 minutes, the current time will be
displayed (waiting state) and the selected function will be
recognized as invalid.
• To make sure that your input was detected right from the
SensorTouch-Control panel, a buzzer will sound.
Start / Pause / Cancel + Standby
• Start:
• Pause:
• Cancel + Standby:
2 times
Hint:
Press the
key briefly to interrupt the cooking
process. A long press will be recognized as invalid.
key
33