Operation Of Main Switch - Invacare Scorpius Gebrauchsanweisung

Scorpius
Power On / Error Light Indicator:
• Power light on – See section 4-2 for details
• Error light on – See section 8 for details
Speed Adjustment:
• Press acceleration [
increase / decrease speed.
• There are 3 different speeds of adjustment fastest 3>2>1
slowest. (Figure 7)
• Do not set the speed at maximum when operating the
scooter.
• Adjust the speed at maximum when inclining a slope,
and adjust to minimum speed when declining.
Head-Light / Tail-Light:
• Press button [
light. The [ ] will be lighted on the panel. Light will be on on
the panel. (Figure 8)
• Switch off by pressing the button again. The [
off on the panel. (Figure 8)
Tail-light will be on anyway when the brake is engaged and
when the scooter speed is reduced.
Horn:
• Press horn button to sound the buzzer. Buzzer sound and light
will last until you release the horn button. (Figure 9)

4.2 OPERATION OF MAIN SWITCH

Main Switch (Touch Screen Version):
• Press power button to turn on/off (Figure 10). See section 4-1 for details.
Main Switch (Key Version):
• Turn the key clockwise to turn on, counterclockwise to turn off (Figure 11).
Sleep Mode:
• Scooter will go into sleep mode with one long
beep warning sound if no throttle activity is
detected for a programmable time period.
(Default programmable time is 10 mins.)
• When scooter is in sleep mode, all lights on the
control panel will be off, and the scooter will not
respond to commands.
• To wake up the scooter, turn the power (key)
switch off and then on again.
1654767~A
] / deceleration [
] once to switch on the head-light and tail –
Figure 6
] button to
Figure 7
] light will be
Figure 8
Figure 9
Instruction Booklet
(1) (2) (3)
12