Beta Motorcycles RR 125 2T EUROPA Bedienungsanleitung Seite 154

4
M04_L0043
M04_L0002
15Nm
RR 125-200
M04_L0030
M04_L0002
EN
1
RR 250-300
2
15Nm
M04_L0003
1
REPLACEMENT
Always perform the replacement when
engine is hot:
- Position the drive on a flat base ensuring
stability.
- Remove the engine casing by loosening
the screws shown in the figure.
- Place a container under the engine.
WARNING:
Hot oil can cause severe burns!
Screw on filler cap 1 again.
- Unscrew filler plug 1 and drain plug 2.
- Drain all the oil from the crankcase.
- Place the cap 2 and tighten to specified
torque.
Pour in the quantity of liquid indicated on
page 10.
Use the oil indicated on page 18 in
the "Recommended lubricants and liquids"
table.
2
Screw on filler cap 1 again.
WARNING:
Dispose of used oil in compliance with the
regulations in force.
56