Protecting The Environment - DeWalt DW711 Bersetzt Von Den Originalanweisungen

3. Loosen the knob to adjust the clamp up or down, then use the fine adjust knob to firmly
clamp the workpiece.
nOtE: Place the clamp on the right side of the base when beveling. ALWAYS MAKE DRY RUNS
(UNPOWERED) BEFORE FINISH CUTS TO CHECK THE PATH OF THE BLADE. ENSURE THE CLAMP
DOES NOT INTERFERE WITH THE ACTION OF THE SAW OR GUARDS.
Recommended Blades Available
type of blade Blade dimensions (diameter x
bore x no. of teeth)
DT1529 series 40
DT1530 series 40
DT1736 series 60
DT1737 series 60

Protecting the Environment

Separate collection. Products and batteries marked with this symbol must not be
disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled reducing
the demand for raw materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at www.2helpU.com.
Usage
260 x 30 x 24 For general purpose, ripping
and cross-cutting of wood and
plastics
260 x 30 x 80 TCG for use with aluminum
260 x 30 x 58 ATB for fine cutting of
manmade and natural wood
260 x 30 x 80 TCG for extra fine cutting of
manmade and natural wood
EngLIsh
25