English (Original Instructions); Safety Instructions - DeWalt DW711 Bersetzt Von Den Originalanweisungen

EngLIsh
TABLE TOP MITRE SAW
DW711
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and
e
innovation make D WALT one of the most reliable partners for professional power tool users.
e
Technical Data
Voltage
Type
Power input
Power output
Max. blade speed
Blade diameter
Blade bore
Blade body thickness
Riving knife thickness
Riving knife hardness
Weight
Cuttting capacities
Mitre saw mode
Mitre (max. positions)
Bevel (max. positions)
At 90°, at max. height, max. width of cut
At 45° mitre, at max. height, max. width of cut
At 45° bevel, at max. height max. crosscut
At 90˚, at max. depth of cut 96 mm, max width 20 mm, max. cut off 15 mm
Saw bench mode
Max. depth of cut
Noise values and vibration values (triax vector sum) according to EN61029-2-11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been measured in accordance
with a standardised test given in EN61029 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
20
EC-Declaration of Conformity
Machinery Directive
DW711
Table Top Mitre Saw
DW711
V 230
AC
7
D WALT declares that these products described under Technical Data are in compliance with:
e
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-11:2012 +A11:2013
W 1300
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information,
W 900
please contact D
min -1 2950
The undersigned is responsible for compilation of the technical file and makes this declaration
mm 260
on behalf of D
mm 30
mm 2.0
mm 2.3
HRC 43 ±5
Markus Rompel
kg 20
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
24.02.2017
left 50˚
right 50˚
left 48˚
Definitions: Safety Guidelines
right 0
The definitions below describe the level of severity for each signal word. Please read the
mm 134 x 50
manual and pay attention to these symbols.

mm 94 x 50
mm 134 x 50


mm 0–50

dB(A) 90
dB(A) 103

dB(A) 3

Safety Instructions

2
m/s 1.9

m/s 2 1.5
Read all these instructions before attempting to operate this product and save these instructions.
General Safety Rules
1 . Keep work area clear. Cluttered areas and benches invite injuries.
2 . Consider work area environment. Do not expose the tool to rain. Do not use the tool
in damp or wet conditions. Keep the work area well lit (250 - 300 Lux). Do not use the
tool where there is a risk of causing fire or explosion, e.g., in the presence of flammable liquids
and gases.
3 . Guard against electric shock. Avoid body contact with earthed surfaces (e.g., pipes,
radiators, cookers and refrigerators). When using the tool under extreme conditions (e.g.,
high humidity, when metal swarf is being produced, etc.), electric safety can be improved by
inserting an isolating transformer or a (FI) earth-leakage circuit-breaker.
4 . Keep other persons away. Do not let persons, especially children, not involved in the work,
touch the tool or the extension cord and keep them away from the work area.
5 . Store idle tools. When not in use, tools must be stored in a dry place and locked up securely,
out of reach of children.
6 . Do not force the tool. It will do the job better and safer at the rate to which it was intended.
7 . Use the right tool. Do not force small tools to do the job of a heavy duty tool. Do not
use tools for purposes not intended; for example do not use circular saws to cut tree limbs or
logs.
8 . Dress properly. Do not wear loose clothing or jewellery, as these can be caught in
moving parts. Non-skid footwear is recommended when working outdoors. Wear
protective hair covering to contain long hair.
9 . Use protective equipment. Always use safety glasses. Use a face or dust mask
if working operations create dust or flying particles. If these particles might be
considerably hot, also wear a heat-resistant apron. Wear ear protection at all times.
Wear a safety helmet at all times.
10 . Connect dust extraction equipment. If devices are provided for the connection of dust
extraction and collecting equipment, ensure these are connected and properly used.
WALT at the following address or refer to the back of the manual.
e
WALT.
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING! When using electric tools basic safety precautions should always be followed
to reduce the risk of fire, electric shock and personal injury including the following.
SAVE THIS MANUAL FOR FUTURE REFERENCE