General Safety Instructions For Power Tools - Parkside PEXS 270 C3 Originalbetriebsanleitung

GB MT
Carefully read these operating in-
structions.
Wear ear protection.
Wear eye protection.
Wear respiratory protection.
Wear safety gloves.
Danger of electric shock!
Remove the plug from the mains
socket before carrying out mainte-
nance and repair work.
Injury hazard caused by rotating
tool! Keep hands away.
Protection class II (double insulation)
Electrical appliances must not be dis-
posed of with the domestic waste.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols with information
on preventing damage.
Always remove the mains plug be-
fore working on the appliance.
Connect the appliance to the pow-
er supply.
Help symbols with information on
improving tool handling.
42
General safety instructions
for power tools
WARNING! Read all safety
directions, instructions, illus-
trations and technical data
provided with this power
tool. Omissions in the compliance
with safety directions and instruc-
tions can cause electrical shock, fire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fied plugs and matching outlets will
reduce risk of electric shock.