EN: Safety guide
Detector diodes
CAUTION
Destruction of the detector diodes caused by too high an input power
Connecting the output and input of optical circuit packs with a transmit power in excess
of -3 dBm over short distances will cause the destruction of the detector diodes, as the
input power is then too high.
Use an optical attenuator pad of approx. 10 to 20 dB when establishing connections over
short distances for test purposes.
Receiver sensitivities
You can find the receiver sensitivities in the 1643 Access Multiplexer (AM) and 1643
Access Multiplexer Small (AMS) Applications and Planning Guide (chapter "Technical
specifications").
............................................................................................................................................................................................................................................................
365-312-878
Issue 3, June 2007
Alcatel-Lucent - Proprietary
See notice on first page.
Installation
1 - 2 1